ModePaaS aims to define a set of tools and techniques to automatically deploy software applications on multiple PaaS (Platform as a Service) solutions. It enables to declaratively describe the (...)
PRIMa-Q aims at prototyping a toolset to support the management of risks faced by SME in complex project in terms of identification, quantification and impact control. It will also propose (...)
The SAMOBI project aims at the deployment of an IT platform supporting the organization of an effective shared shuttle service at the regional level, integrating route optimization features, (...)
DIGITRANS is a project led by Alstom in the context of Competitiveness clusters. It aims at developing new services and tools allowing infrastructure managers and railway operators to increase (...)
The TRICARE project is concerned with the use of non-intrusive sensors to monitor elderly’s activities of daily living (ADL), thus in order to detect eventual behavior anomalies while preserving (...)
TANGO aims at providing development tools and runtime middleware to better exploit the capabilities offered by heterogeneous hardware such as multi or many-core CPU, GPU and FPGA. As a result, (...)
The MANET project studies and evaluates emerging architectures and communication standards for Internet of Things (IoT) in order to address new challenges for mobility and reliability of these (...)
This Technological Innovation Partnership aims at building the first version of the Big Data service catalog (infrastructure and software) which will be made available through the Platform of (...)
Today, the creation of Virtual Private Networks is only possible on an homogeneous Cloud infrastructure. The BEACON project aims at enabling federated cloud networking, which allows the creation (...)
The MOBITS project aims to define and develop a demonstrator of an integrated and dynamic information system to both passengers and operators of public transport in order to provide a real-time (...)
EAM-SDI is a research project in the specific field of automatic management of infrastructure. The project objective is to automate the monitoring and configuration of the infrastructure and the (...)
Leveraging its expertise in co-creation and ICT, CETIC contributes to the initiative Creative Wallonia which aims at creating new sources of value creation through open innovation. In this (...)
SEAMPAT aims to improve the continuity of medication between home and hospital by developing a medication reconciliation platform promoting active patient (...)
SimQRi is a CORNET project also involving the Fraunhoffer Institute and which aims at quantifying the procurement induced risk and manage its impact in complex process (...)
The INOGRAMS project aims to study new technologies to increase the competitiveness of rail operators in the face of transportation means such as aircraft and road transport. This technology (...)
SAVE aims at studying new autonomous vision systems for the Internet of Things. Indeed, new versatile applications require smart objects able to transmit pictures and videos but having long (...)
EVIDENCE aims at producing a roadmap for a Common European Framework for systematic and uniform acquisition, use and exchange of digital evidence in courts of EU member states. The resulting (...)
REDIRNET aims at providing a decentralized framework of interoperability between agencies of emergency responders. In addition to communications, REDIRNET will enable interoperability of (...)
The ASCETIC project focused on providing novel methods and tools to support software developers who aim to optimise energy efficiency and minimise the carbon footprint resulting deploying, and (...)
Industrial legacy software sometimes comes with responsiveness and availability constraints that is barely compatible with the cloud SaaS model. SaaS-WMS aims to demonstrate how such an (...)
POLCA project aims to develop a new approach to address programmability concerns in embedded systems and high-performance computing. Based on mathematical transformations, POLCA will defines (...)
The goCloud project aims to help enterprises in the IT field benefit from Cloud Computing by allowing them to offer their solutions, more easily, faster and with reduced legal (...)
Today, carpooling platforms have a very tight supply in terms of information, number of users and journeys, especially across borders. NweRIDE proposes to improve the adoption of carpooling via (...)
The e-Patch project aims to study and develop an electronic patch equipped with long-range wireless communication allowing for geolocation and fall detection. E-Patch will be designed to improve (...)
The Numericanal project aims at connecting regional and national strengths, knowledge and experience of 7 organizations active in the field of ICT and waterways management to create a (...)
The Creative Wallonia initiative places creativity and innovation at the heart of Wallonia’s economic development. In this context, the Living Lab concept is a laboratory for open innovation. (...)
DeciWeb aims at enhancing traditional Business Intelligence analyses by retrieving and integrating relevant data from the Web.
To avoid situations of vendor lock-in in Cloud Computing, PaaSage is developing a methodology and tools to support model-based development of software applications independently of the (...)
The QualIHM project aims to help UI developers design their user interfaces as dynamic and evolving prototypes integrating the collection, discussion and validation of UI related requirements. (...)
To remain competitive, the European steel industry requires improvement of its processes. The project aims to develop a new paradigm where software agents, at each step of the steel manufacturing (...)
The GIR project aims to provide an effective ICT solution to improve the security of hazardous goods transport. The software tool developed during the project will assist safety advisers in (...)
DAPCARE is aimed at developing the Patient Dosimetry eBook, a standardised solution for archiving and sharing dosimetric data for patients receiving medical ionising radiation delivered in (...)
The BonFIRE-ExSec experiment aims to study the impact of scalability and heterogeneity on performance of security solutions. The bottom line of this investigation is to develop an empirical way (...)
Locotrac project aims to develop low-cost technologies to secure regional and local railway lines including mechanisms of ATP (Automated Train Protection). The project will integrate these new (...)
The PIPAS project aims at developing a software solution to help in modelling, piloting and supervising healthcare processes for treating patients, in the area of cancer (...)
SPES aims at transferring the approach and results achieved in the implementation of OLDES project to support patients from four European locations through e-service solutions, especially (...)
ComodIT project aims to simplify and secure Cloud computing technologies by developing a new approach to automate provisioning and management of complete and integrated IT and mobile (...)
MidFlex aims to develop a middleware to facilitate the design and deployment of IPv6-based sensor network applications in the scope of the Internet of (...)
This project aims to provide a methodology allowing SME to adapt their software, designed to run on monocore processor, to allow them to run on multicore processors, on GPU or on FPGA based (...)
AMACS in an EraSME project whose goal is to develop and evaluate in real-life situations an ICT-based system that can automatically monitor the activities of daily living (ADLs) (sleeping, (...)
The SAT project is developing new technologies for aircraft and smarter airborne systems. This project puts CETIC at the forefront of innovative research to support incremental and (...)
The BEM solution helps enterprises to minimise the fallout resulting from unexpected events, especially in the transportation and distribution sectors, thanks to an affordable yet optimised (...)
PONTE supports the entire clinical trial process, so that it is easier to create a research hypothesis, define the protocol and select the right patients. As a result, the public has quicker (...)
The NAPLES platform allows SMEs to standardise application development according to the international standard ISO 29110 through workflow-oriented software (...)
CALiPro aims to improve and automate the configuration phase of software product lines through the development of innovative tools, services and methods.
In response to the ageing of society, the increase in chronic illnesses and the shortage of caregivers, this project is developing innovative IT-based services designed to respond to the needs of (...)
CETIC applies its technological expertise to help the platform reach its highest level of performance and interoperability. Technology quality and high performance are key success factors for the (...)
The C2A project aims to design, develop and implement an intelligent interconnection system between embedded hybrid equipment in transport vehicles. The project goal is to optimize and extend the (...)
This project aims at developing an innovative control system for orthetic devices (i.e. prostheses designed to compensate for absent articular or muscular functions) exploiting the human brain (...)
CETIC’s cluster, acquired in the scope of the SINUS project, is an opportunity for businesses willing to adapt faster to new IT architecture concepts such as distributed storage, Service Oriented (...)
Experience transfer and knowledge management are known to improve efficiency and competitiveness of organizations. However, focal point of the developed knowledge management approaches is usually (...)
S-CUBE, the Software Services and Systems Network, will establish an integrated, multidisciplinary and vibrant research community, which will help enable Europe to lead the software services (...)
DEPLOY is a research project of the European Commission (FP7) which aims at promoting the use of formal methodology in European industry, and developing industrially scalable formal methods. (...)
RESERVOIR will enable massive scale deployment and management of complex IT services across different administrative domains, IT platforms and geographies. The project will provide a foundation (...)
The TELECOM project is a research project of the Skywin Competitiveness Cluster, representing the Aerospace industry, which aims at increasing the economic potential of this sector by developing (...)
More and more IT solutions are using open source software at some stage. However, the path to successful adoption is not straightforward due to technological, economic and licensing reasons. On (...)
The CE-IQS project encompasses several topics in the field of system engineering. Activities are grouped in 5 topics dedicated to methodologies, quality and certification with a technology focus (...)
Started in January 2007, the OLDES project aims at developping ICT solutions for the elderly persons to increase their quality of life and wellbeing while staying at home. Besides this technical (...)
The 3WSA project enables Walloon companies to take a more competitive position with respect to the technological tools necessary to build secured geomatic service (...)
QUALity of Open Source Software (QUALOSS) is a Framework Programme 6 project funded by the European Commission. It is coordinated by CETIC and involves eight partners from 5 European countries, (...)
Thanks to its expertise in embedded equipment, communication protocols and interfaces, CETIC can design an embedded system dedicated to the acquisition, local processing and transmission of data (...)
Several industries are currently facing the issue of developing mission-critical embedded computer-based systems with increasing complexity, dependability and economic pressures such as cost and (...)
The mission of Business Experiments in GRID (BEinGRID) is to establish effective routes to facilitate the adoption of grid technologies across the European Union (EU) and to stimulate research (...)
GridTrust is a European project from the Sixth Framework Programme coordinated by CETIC. The overall objective of the GridTrust project is to develop the technology to manage trust and security (...)
The goal of AssessGrid is to address obstacles to wide adoption of Grid technologies by bringing risk management and assessment to this field, enabling the use of Grid computing in business and (...)
This paper presents the results of the CANAPE project. The main objectives of this project are to study and to develop a prototype of FPGA based Hardware (...)
CoreGRID was a Network of Excellence in Grid technology funded by the European Commission under the Sixth Framework Programme for Research and Development. The project involved 46 research teams (...)
The objective of the RETICOM project (REal TIme COMmunications) is to study and develop a set of tools to ease the implementation of flexible and powerful communicating embedded (...)
The importance of certification and labeling is crucial for the regional market which is characterized by a large number of SMEs often in an improvement phase and, therefore, seeking recognition (...)
Requirements engineering is a key step in the development of a computer-based system. The success of this step is crucial. However the state of practice reveals many weaknesses both in small and (...)
The FAUST toolset was developed to help reaching high quality in requirements document, especially for complex systems with critical aspects. FAUST provides tools for the validation, verification (...)
